Using Setup 3-13
You can use the Profile Manager to create your own profiles. Select
“Create” from the Profile Manager screen, and then enter the requested in-
formation.
While you are working, the current profile is the one with the button that
appears pressed down.
For more information on creating profiles, see the online PowerPanel help.
Minimize
Select minimize to change the PowerPanel toolbar into a single icon, named
PowerPanel Custom Settings.
Help
The last four PowerPanel menu items provide online help. Review the online
help for more complete information on using PowerPanel, customizing the
toolbar and learning more about profiles and commands.
Setup Utility and PowerPanel
When you start your system, the parameter settings you entered on the
Power Savings screen in Setup are in effect.
NOTE
If you set the Power Savings parameter in Setup to Power
Management Off, no power management is in effect at start-up. For
example, even if you set the Video Timeout parameter to 10 min-
utes (the length of time both the keyboard and the mouse remain in-
active before the screen is turned off) the screen is not turned off
after 10 minutes if the Power Savings parameter is set to Power
Management Off.
Setup parameter settings remain in effect unless you change the setting via
PowerPanel. Also, if you are using more than one toolbar from PowerPanel,
the toolbar last selected using Preferences is in effect at power on. The
rightmost profile on this toolbar is the active profile until you select another.
The Setup utility settings are not in effect again until the next power-on.
Summary of Contents for VERSA 6000 Series
Page 9: ...viii Contents ...
