7-2 Solving Problems
Troubleshooting
PROBLEM
WHAT TO DO
LCD screen is dark
and blank.
Power-saving mode has shut off the backlight.
Press a keyboard key or the Suspend button.
The built-in LCD may not be selected. Press
Fn F3
once or twice.
Brightness control needs adjustment. Adjust the
control.
The system entered Suspend mode due to low
battery power. (Check the Status bar for a half-
moon icon.) Plug in the AC adapter or replace
the battery pack, then press the Suspend button to
resume operation.
Battery power does not
last long.
Use power-saving modes.
Information on the LCD
screen is difficult to see.
Adjust the brightness control.
An optional component
does not work.
Make sure the component is securely installed or
connected. Verify that the system parameter for the
I/O port configuration is set correctly in Setup.
The Suspend/Resume
button does not work.
A disk drive might be busy. Wait until the disk drive
stops and try again.
The NEC Versa may be connected to a docking
station. Some power management functions do
not work when the NEC Versa is docked.
START-UP PROBLEMS
The system displays an invalid configuration error message at power on
when there are the following conditions:
■
the current configuration information doesn't match configuration infor-
mation stored in Auto Setup, such as when an internal option is added.
■
the system loses configuration information.
If either condition is true, the system displays an “invalid configuration in-
formation” message.
Summary of Contents for VERSA 6000 Series
Page 9: ...viii Contents ...
