NEC UNIVERGE NEAX 2000 IPS, Maintenance Manual

Page: 64 / 262

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 54 –
NWA-008847-001 Rev.3.0
a6ch1001.fm
Service Conditions
(1) Centralized MAT can manage 2000 IPS, IPS
DMR
/IPS
DM
, 2000 IVS
2
, and retrofit system. Series
3000 or later software version is required for 2000 IPS/IPS
DMR
/IPS
DM
in each center and local
office. Series 2200 R3.2 (R3.2) or later software version is required for 2000 IVS
2
/retrofit system in
each center and local office.
(2) Centralized MAT can manage up to 255 offices per CCIS/IP network, and up to 5 networks.
(3) Centralized MAT and MATWorX must be installed in the same PC.
MATWorX Ver.3 or later for 2000 IVS
2
is required. For 2000 IPS/IPS
DMR
/IPS
DM
, MATWorX
ver.4.2 or later is recommended.
(4) Centralized MAT is connected to the PBX over RS-232C interface or Local Area Network (LAN).
Modem connection is not available.
(5) Only one 2000 IPS or IPS
DMR
/IPS
DM
or 2000 IVS
2
can be the center office per network which is
connected to Centralized MAT. Retrofit system must be a local office.
(6) Offices connected through Event based CCIS cannot be managed by Centralized MAT.
(7) Offices connected through H.323 standard cannot be managed by Centralized MAT.
(8) MP EXPMEM card is required for 2000 IVS
2
which is used as the center office.
(9) PBX number, which is sent to the center office with fault information, is converted to Point Code
according to the data assigned by CME3 Y=02 at the center office.
(10) Point Code, date which the fault is detected, and MJ alarm/MN alarm/- - alarm can be reported to
Centralized MAT.
(11) MJ alarm/MN alarm/- - alarm are set as the objects of fault information stored by CMEA Y=2.
(12) The alarm indication can be cleared by MATWorX Fault Display Add-In or CMEA Y=1 entry from
CAT/MAT.
(13) The interval time of detecting fault information is unified per system. (The initial setting is 0.5
minutes.)
CENTRALIZED MAT