NEC UNIVERGE NEAX 2000 IPS, Maintenance Manual

Page: 72 / 262

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 62 –
NWA-008847-001 Rev.3.0
a6ch1001.fm
• To provide the remote download (Main Site) from the MAT/CAT by Command Operation
[Series 3500 software required]
(1) To set the FTP server information, do the following programming.
DESCRIPTION DATA
Assign the IP address of FTP server to down-
load the MP program. •
(1)
(2)
Y=10
00
000000000000-255255255255:
IP address of FTP server
CCC
: Clear
NONE : No data
Assign the port number of FTP server for file
transfer (control). •
(1)
(2)
Y=10
01
00001-65534: TCP Port No. 1-65534
CCC
: Clear
NONE : TCP Port No. 21
NOTE: Port No. 21 is used for the file transfer (control), and Port No. 20 is used for the file trans-
fer in initial data setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file transfer
(control), and Port No. 2999 is used for the file transfer.
Assign the user ID for FTP server
NOTE:
When no user ID is assigned, log
into the FTP server with “anony-
mous”.
•
(1)
(2)
Y=10
02
X-XXXXXXXX: User ID
X: A-Z, 0-9: Character
(Maximum 8 characters)
CCC : Clear
NONE : No data
NOTE
Assign the password for FTP server.
NOTE: While entering the password with
CAT “*” (asterisk) is displayed on
LCD. When entering the password
with the MOC screen, actual data is
displayed.
•
(1)
(2)
Y=10
03
Z-ZZZZZZZZ: Password
Z: A-Z, 0-9 : Character
(Maximum 8 characters)
CCC : Clear
NONE : No data
START
CM0C
A
JULY/01/2006
MP PROGRAM DOWNLOAD (FTP)