NEC UNIVERGE NEAX 2000 IPS, Maintenance Manual

Page: 22 / 262

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 12 –
NWA-008847-001 Rev.3.0
a6ch1001.fm
Programming Procedure
(1) To set the fault information storage from the CAT/MAT by Command Operation
DESCRIPTION DATA
Enable the fault information storage fea-
ture. (1)
(2) 450
1
: To store
Specify the processing at the time of fault
storage memory overflow. (1)
(2) 451
0
: No fault information is registered in
case of Fault Memory overflow
1 : Fault information is overwritten in
case of Fault Memory overflow
Assign which kind of fault information is
stored into the fault information memory,
and which kind of alarm is indicated. •
(1)
(2)
Y=2
See the following table.
See the following table.
NOTE: CMEA programming can be set by the Fault Storage in MAT.
CMEA
CM08
START
A
JULY/01/2006
FAULT MESSAGE