User Guide
232
www.nec-computers.com
Smart Q-Fan Configuration
Note: when the actual CPU1, CPU2 or System temperature
is equal to the target temperature, the respective fan will run at
full speed.
CPU1 Voltage
Control
Default VID+50mV
Default VID
CPU2 Voltage
Control
Default VID+50mV
Default VID
Hyper Transport
Voltage
1.20V
1.25V
1.30V
1.35V
Adjust Hyper transport voltage.
Table 46: Smart Q-Fan Configuration Submenu
Feature
Choices or
Display Only
Description
Your Setting
Smart Fan Control
Disabled
Enabled
Allows you to enable or disable
the Smart Fan Feature.
Set this field to
Enabled
in
order to access the fields
below.
System Target
Temperature
50
20 to 50
Allows you to set the target
temperature for the system.
CPU1 Target
Temperature
60
30 to 60
Allows you to set the target
temperature for the CPU1.
CPU2 Target
Temperature
60
30 to 60
Allows you to set the target
temperature for the CPU2.
Table 45: Voltage Monitor Submenu (Continued)
Feature
Choices or
Display Only
Description
Your Setting
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...