User Guide
22
www.nec-computers.com
2.
Remove the onboard battery.
3.
Set position as 2-3 (Clear CMOS).
4.
Wait 5 to 10 seconds.
5.
Set position as 1-2 (Normal [Default]).
6.
Re-install the battery.
7.
Plug the power cord and power on the system. The message ‘CMOS checksum
bad’ displays.
8.
Press
DEL
to enter the BIOS Setup, reload the default settings (or make any
changes that you judge necessary), save and reboot your system.
Figure 6: Clear CMOS Jumper
Wake Up using Keyboard (KBPWR1)
Set this jumper to enable or disable the keyboard wake up feature. If it is set to 2-3,
pressing a key on the keyboard will wake up the system. (Check that this feature is also
enabled in the BIOS Setup utility).
Figure 7: Wake Up using Keyboard Jumper
, ,
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...