User Guide
136
www.nec-computers.com
Cage for Fixed SCSI or S-ATA Drives
Figure 23: Cage for Fixed Hard Disk Drives (front view)
A: Hard disk drive screws
B: Fan bay
C: Thumb screws
Removing the cage
1.
Remove the right side door.
See “Removing the Right Side Door” on page 122.
2.
Remove the front panel.
See “Removing the Front Panel” on page 125.
3.
Remove the 4 thumbscrews (C) holding the cage to the chassis.
4.
Slightly pull out the hard disk drive cage.
5.
Disconnect the data and power cables.
Caution
Be careful when working around the cables connected to the
already installed drives.
If necessary disconnect these cables, but be sure to note which
device each cable or power lead was attached to.
6.
Slide the cage completely out of the chassis.
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...