User Guide
77
www.nec-computers.com
Installing the Support Rails
1.
Install the right support rail
(A in figure 2)
as shown in figure 2.
2.
Secure the rail to the front
(B in figure 2)
and rear
(C in figure 2)
vertical
mounting rails with three screws
(D in figure 2)
and the washer plate
(E in
figure 2)
.
Figure 9: Installing the right support rail
3.
Insert two caged nuts
(F in figure 2)
as shown in figure 2. One in the hole just
above the support rail, the other one eight holes above. Insert the caged nuts in
the front mounting rail as follows (see figure 3):
■
Position the caged nut on the inside of the front vertical mounting rails.
■
Hook the side lip of a caged nut into the square hole in the rail.
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...
