![background image](http://html.mh-extra.com/html/nec/sa2500/sa2500_user-manual_248730152.webp)
User Guide
149
www.nec-computers.com
System Power Cables
Power cables come from the power supply and are attached to standard storage devices.
System power cables vary in length and provide connector sizes to accommodate a
variety of supported storage configurations. Power cable connectors are keyed to fit
only in the correct position.
Figure 31: IDE Storage Device Power Cable Connector
Cabling an Optical Disk Drive
All optical devices require power and IDE cable connections. Devices shipped with the
system are already connected.
The following procedure explains how to attach the cables to an optical drive.
1.
Connect the IDE cable connector (B) to the matching pins on the storage
device.
■
Take care to prevent bending drive connector pins.
■
Align the cable connector to the matching pins on the drive.
2.
Locate an available power connector coming from the power supply.
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...