User Guide
78
www.nec-computers.com
■
Push the other side lip of the caged nut into the square hole in the rail
until it is secured.
■
Repeat for each caged nut.
Figure 10: Inserting a caged nut
4.
Repeat steps 1 to 3 for the left support rail.
Attaching the Handles to the Rack Mounting Frame
Two handles are attached to the rack mounting frame. The handles are used to easily
slide the server in and out of the rack.
Warning
The handles are only used to slide the server in and out of the
rack.
DO NOT
use these handles to carry the server.
Attach the handles
(A in figure 1)
to the rack mounting frame with two screws
(B in
figure 1)
.
Installing the Rack Mounting Frame on the Server
Install the rack mounting frame on the server as follows:
1.
Remove the right side door as described in
“Removing or Installing the Right
Side Door” on page 122
.
2.
Remove the front panel as described in
“Removing and Replacing the Front
Panel” on page 125
.
Summary of Contents for SA2500
Page 1: ... User s Guide SA2500 WA2500 ...
Page 2: ...This page is intentionally left blank ...
Page 252: ...This page is intentionally left blank ...
Page 253: ... ...