![background image](http://html1.mh-extra.com/html/nec/powermate-es-series/powermate-es-series_service-and-reference-manual_3965483066.webp)
3-18 Disassembly and Reassembly
5.
Press down on the battery clip to release the battery from its socket.
Removing the Battery
A – Battery
B – Clip
6.
Remove the battery and discard in accordance with the manufacturer’s instructions.
The battery can explode if it is incorrectly replaced or improperly
discarded. Use only the same type battery or an equivalent type recommended by the
manufacturer when replacing the battery.
Lithium acts as a catalyst when exposed to water and causes spontaneous combustion on
contact. Discard used batteries according to the manufacturer’s instructions.
7.
With the positive (+) side facing up, press the new battery into the socket. Be sure that you
are using the same type battery as removed or an equivalent type recommended by the
manufacturer.
8.
If unplugged, plug in the diskette drive cable by inserting the cable into the connector and
securing it in place with the brown cable retainer.
9.
Replace the system cover (see “System Cover Removal” earlier in this section).
10.
Connect external peripherals and power cables.
11.
Run Setup to reconfigure system parameters (see Section 2, “System Configuration”).
Summary of Contents for POWERMATE ES Series
