NEC POWERMATE ES Series, Service And Reference Manual

Page: 37 / 132

2-14 System Configuration
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
Green PC LED
Status Dual Color, Single Color, Blinking
Select Dual-Color to show a green LED for normal use and an orange
LED for standby use.
Video Power Down
Mode
Standby, Disabled, Suspend
Select Standby or Suspend to power down the video display as a
power saving feature.
Hard Disk Power
Down Mode Suspend, Standby, Disabled
Select Suspend or Standby to power down the hard disk as a power
saving feature.
Standby Time Out
(Minutes)
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in full power on
state before entering Standby state.
Suspend Time Out
(Minutes) Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in Standby state
before entering Suspend power state.
Power Button
Function Suspend, On/Off
Suspend sets the power switch for Suspend (Sleep) mode. With power
on, pressing the switch once places the system in sleep mode.
Pressing and holding the switch in for 4 seconds turns power off.
Restore on
AC/Power Loss Last State, Power Off, Power On
The Power On setting automatically turns power on after a power loss.
The Power Off setting requires the user to restart the system with the
power button. The Last State setting restores the system to the state
where it was on power loss.
Resume on Ring
Enabled, Disabled
Enabled allows the system to boot up on an incoming telephone call.
Disabled causes the system to ignore any incoming call from a
modem.
Resume on LAN
Enabled, Disabled
Enabled allows the system to boot up on an incoming LAN signal.
Disabled causes the system to ignore any incoming signal from LAN.
PME Function Enabled, Disabled
Select Enabled to allow the system to react to PCI Power
Management Enabled wake up events.
Resume on RTC
Alarm Disabled, Enabled
When Enabled, you can choose the time the system boots up (see the
following time settings).