Disassembly and Reassembly 3-7
Install a DIMM module as follows.
1.
Remove the cover, if not already removed.
2.
As necessary, remove any installed DIMM module(s).
3.
Select a DIMM module (see “System Memory” in Section 1).
Before installing a DIMM module, reduce static discharge by touching a
metal part on the chassis.
4.
Align the notches on the new DIMM with the keys in an empty DIMM socket (see the
following figure).
Installing a DIMM Module
A – Plastic Clips
B – Notches
5.
Press the DIMM module firmly into the socket until the clips at both ends of the socket
click closed.
6.
Replace the cover.
Note
If there is a discrepancy in the amount of memory displayed at the Power-On Self Test
or in Windows with the amount of memory installed, check that the memory modules are installed
correctly.
Summary of Contents for POWERMATE ES Series
