3-6 Disassembly and Reassembly
DIMM Module Removal
Remove a DIMM module from the system board as follows.
Before removing a DIMM module, reduce static discharge by touching a
metal part on the chassis.
1.
Remove the system cover (see “Cover Removal” earlier in this section).
2.
Locate the DIMM module sockets on the system board.
Locating the DIMM Module and Processor Sockets
A – DIMM Module Sockets 1 and 2
C – Fan Connector (under CD-ROM drive)
B – Processor Socket 370
3.
Eject a DIMM module by pressing the plastic clips at the outer edges of the socket away
from the DIMM module.
Removing a DIMM Module
A – Plastic Clips
4.
Remove the DIMM module from the socket and store in an anti-static bag.
Summary of Contents for POWERMATE ES Series
