Technical Information 2-3
WARNING:
Do not plug in the computer
power cable until you connect all other external
cables (for example, keyboard, mouse, monitor,
and LAN).
The following sections provide installation guidelines and procedures.
CAUTION:
The push-button on/off power
switch on the front panel of the computer does
not turn off the AC power. To remove AC
power from the computer, you must unplug the
AC power cable from the power supply or the
wall outlet.
Checking the Voltage Switch
A 51-watt (rated) power supply is integrated into the computer. The voltage ratings for the
power supply are provided in the following table.
Table 2-1 Power Supply Voltage Rating
Voltage
Input Frequency (Hz)
Current (Amps)
100-127
60
2
200-240
50
1.25
Before connecting the power cable to the back panel of the computer, make sure that the
voltage selector switch is set to the correct AC line source voltage for your region.
For line voltages between 100 and 127 VAC, set the line voltage selector on the
power supply switch to 115V (115 VAC).
For line voltages between 200 and 240 VAC, set the line voltage selector switch
on the power supply to 230V (230 VAC).
Make sure that the correct voltage (115V or 230V) is visible on the switch (see the
following figure). If necessary, use a flat-head screwdriver to set the switch.
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...