Disassembly and Reassembly 5-13
Hard Disk Drive
This subsection describes how to remove and replace the hard disk drive.
Removal
To remove the hard disk drive, proceed as follows:
1.
Turn off the system and disconnect the power cord and all peripheral cables
connected to the system.
2.
Remove the system unit top cover (see “System Unit Top Cover”).
3.
Remove the front bezel (see “Front Bezel”).
4.
Separate the two halves of the chassis (see “Opening the System Chassis” in
Section 3).
5.
Unplug the power and IDE cables connected to the hard disk (see Figure 5-8).
6.
Remove the four screws attaching the hard disk to the drive chassis.
7.
Lift out the hard disk.
Figure 5-8 Removing the Hard Disk Drive
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...