Disassembly and Reassembly 5-9
4.
Separate the two halves of the chassis (see “Opening the System Chassis” in
Section 3).
5.
Remove the system board and riser card (see “System Board and Riser Card”).
6.
Using a medium straight-blade screwdriver, pry under the EMI shield and
free the shield (see Figure 5-5, B).
7.
Swing the EMI shield out and disengage it from the tabs at the top (see
Figure 5-5, A).
Figure 5-5 Removing the EMI Shield
Replacement
To replace the EMI shield, proceed as follows:
1.
Complete steps 1 through 7 in the previous subsection.
2.
Insert the EMI shield under the two tabs at the top-left side (see Figure 5-5, A).
3.
Swing the EMI shield in and engage the four tabs at the bottom (see
Figure 5-5, B).
4.
Reinstall the system board and riser card (see “System Board and Riser Card”).
5.
Reattach the top and bottom halves of the chassis (see “Closing the System
Chassis” in Section 3).
B.
A.
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...
