Disassembly and Reassembly 5-5
Figure 5-1 Removing the System Unit Top Cover
Replacement
To replace the system unit top cover, proceed as follows:
1.
Complete steps 1 through 5 in the previous subsection.
2.
Place the cover on top of the chassis with the front edge slightly forward (see
Figure 5-2, A).
3.
Place your hands on the rear corners of top cover and push down and back to
slide the cover into position.
4.
Connect the power cord and peripheral cables to the system.
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...
