Option Installation 3-13
Figure 3-10 Removing a DIMM
Installing a DIMM
Install a memory module as follows.
1.
Remove the system unit cover (see “Removing the System Unit Cover”).
2.
Open the system chassis (see “Opening the System Chassis”).
3.
If you need to remove a currently installed memory module, see “Removing a
DIMM.”
CAUTION:
Before you install a module, reduce
static discharge by touching the system's metal
chassis.
4.
Align the new module with the empty memory socket. Make sure the notches on
the module align with the keys in the socket.
5.
Press the module firmly into the socket.
6.
Make sure the locking clips at the ends of the module click closed.
7.
Close the chassis (see “Closing the System Chassis”).
8.
Replace the system unit cover (see “Replacing the System Unit Cover”).
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...
