Disassembly and Reassembly 5-17
Figure 5-11 Removing the System Board Screws and Riser Card Cables
7.
Remove the three rivets attaching the riser card to the side of the chassis (see
Figure 5-12, A).
Figure 5-12 Removing the Plastic Rivets on the Riser Card
8.
Pull the system board away from the EMI shield (see Figure 5-13, A).
9.
Tilt the system board until the riser card clears the lip of the chassis (see
Figure 5-13, B).
A.
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...