NEC POWERMATE ENTERPRISE NETPC - SERVICE, Service Manual

Page: 139 / 182

Disassembly and Reassembly 5-23
4. Bow bottom cover out (toward the front, near the center) as shown in
Figure 5-18.
5. Slide the bottom cover out to disengage it from the chassis.
Figure 5-18 Removing the Bottom Cover
Replacement
To replace the bottom cover, proceed as follows:
1. Complete steps 1 through 4 in the previous subsection.
2. Lay the bottom cover on a flat surface.
3.
Position the chassis over the bottom cover (see Figure 5-19).
4.
Engage the locking tabs on the bottom cover with the slots in the chassis.
5.
Slide the chassis forward until the tabs lock in place in the slots.