5-6 Disassembly and Reassembly
Figure 5-2 Replacing the System Unit Top Cover
Front Bezel
This subsection describes how to remove and replace the front bezel.
Removal
To remove the front bezel, proceed as follows:
1.
Turn off the system unit and all connected peripheral devices.
2.
Unplug the system unit power cord and disconnect all peripheral cables connected
to the system.
3.
Position the system unit horizontally with the power button facing up.
4.
Remove the system unit top cover (see “System Unit Top Cover”).
5.
Press down on the locking tabs and tilt front bezel outward (see Figure 5-3).
6.
Lift the bezel up and away from the chassis.
A.
Summary of Contents for POWERMATE ENTERPRISE NETPC - SERVICE
Page 6: ...Abbreviations xvii ...
