NEC HV8600, User Manual

Page: 76 / 204

4-4 Upgrading Your System
!
CAUTION
Electrostatic discharge (ESD) and ESD protection. ESD
can damage disk drives, boards, and other parts. This
system can withstand normal levels of environmental ESD
while you are hot-swapping SCSI hard drives or hot-
swapping a failed fan module or power supply. However, we
recommend that you do all procedures in this chapter only at
an ESD workstation. If one is not available, provide some
ESD protection by wearing an antistatic wrist strap attached
to chassis ground (any unpainted metal surface) on your
system when handling parts.
ESD and handling boards. Always handle boards carefully.
They can be extremely sensitive to ESD. Hold boards only
by their edges. After removing a board from its protective
wrapper or from the system, place it component-side up on a
grounded, static-free surface. Use a conductive foam pad if
available but not the board wrapper. Do not slide board over
any surface.
Chassis covers, proper cooling and airflow. For proper
cooling and airflow, always install the chassis side and top
covers before turning on the system. Operating it without
these covers in place can damage system parts.
Contact your sales representative or dealer for a list of approved optional
peripheral devices.