NEC HV8600, User Manual

Page: 111 / 204

Upgrading Your System 4-39
8.
Using the four screws supplied with the drive, reinstall the side rails just
removed from the blank panel tray (see Figure 4-31, A). The rails for each
side of the device are identical.
Note:
Do not use the screws used to secure the blank
panel tray.
B
B
A
A
C
Attaching side rails to
removable media drive
A Side rails
B Four drive mounting
screws
C Drive
Figure 4-31. Attaching Side Rails to a Device
9.
Engage the device side rails into the bay guide rails (see Figure 4-32).
Ensure that the device side rails (see Figure 4-33, A) are inside the bay guide
rails exactly as shown in Figure 4-33, B.
10. Push the drive into the bay until the screw holes of the side rails are directly
in front of the chassis screw holes and secure with the screws previously
removed.
Figure 4-32. Installing Device