NEC HV8600, User Manual

Page: 23 / 204

System Overview 1-9
Chassis Features and Controls
Figure 1-2 shows the server front chassis features and controls. Figure 1-3
shows the server rear chassis features and controls.
A
B C
D
E
F
G
H
I
J K
A SCSI hard drive cages (3) Each cage contains four disk drives. Above each drive are three status
LEDs. Refer to Table 1-3 for information on disk drive status LEDs.
B Ejector button, 3 1/2-inch diskette
drive Press to eject diskette.
C Activity light, 3 1/2-inch diskette
drive When lit, drive is in use.
D LCD panel Displays information about BIOS and system failures (error and diagnostic
information).
E Power LED When green, power is present in system. When off, power is turned off or
power source is disrupted. See Table 1-2 for a list and description of the
system LED indicators.
F Status LED When green the system is OK. See Table 1-2 for a list and description of
the system LED indicators.
G Disk LED When green, internal disk drives are being accessed. See Table 1-2 for a
list and description of the system LED indicators.
H DC power switch Press to turn system DC power on or off.
I Sleep switch Press to enter power saving (sleep) mode. Press again to enter normal
mode of operation. This function requires a corresponding operating
system.
J Load/eject button, CD-ROM drive.
(Note that the front controls may
vary per model of CD-ROM drive.) Press to load CD and eject CD.
K Activity light, CD-ROM drive. (Note
that the status indicators may vary
per model of CD-ROM drive.) When lit, drive is in use.
Figure 1-2. Front Chassis Features and Controls (front doors opened)