NEC HV8600, User Manual

Page: 64 / 204

3-14 Configuring Your System
Changing the Adapter and Device Configurations
The Symbios Configuration Utility Main Menu lists the onboard SCSI adapter
and shows its current settings. The adapter listed controls any SCSI removable
media devices installed in your system.
1.
Using the arrow keys, select the adapter you want to reconfigure. Press
ENTER.
2. Select “Adapter Setup” and press ENTER. The Adapter Setup screen
displays.
Adapter Setup Screen
Your Configuration
Description
Recommended Setting or
Display Only
SYM53C895
Adapter
SCAM Support Off
Parity On
Host SCSI ID 7
Scan Order Low to High
Removable Media
Support None
CHS Mapping SCSI Plug and Play Mapping
Spinup Delay (Secs) 2
Help
Restore Default Setup
Exit this menu
3.
Highlight the function you want to change and press ENTER. You will be
prompted to save changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps:
1. At the Symbios Configuration Utility Main Menu, select the adapter which
connects to the SCSI device you are reconfiguring. The first adapter listed
controls the operation of the hard disk drives; the second adapter controls
any SCSI removable media devices installed in your system. Press ENTER.
2. Select “Device Selections” and press ENTER. The Devices 0 to 7 screen
displays.
3. Select the SCSI device you are reconfiguring and press ENTER. When
configuring SCSI Removable Media Devices, refer to the SYM53C895
Adapter Table below for recommended settings.