NEC HV8600, User Manual

Page: 120 / 204

4-48 Upgrading Your System
9.
While holding the drive in the carrier with your left hand, align the drive’s
screw holes with the carrier’s screw holes and insert the four screws of
appropriate size and length (see Figure 4-36).
10.
While pressing the lock button on the carrier handle, open the handle. Align
the drive/carrier assembly so it engages the guide rails in the hard drive cage
(see Figure 4-37).
11.
Gently push the assembly into the bay until the drive docks with the
backplane connector. Be sure the hook on the bottom of the handle engages
the chassis frame and slowly lift the handle. You will hear a click when the
handle locks in place.
12.
Close the EMI metal panel, and secure with the two thumbscrews.
13.
Close the front door.