NEC HV8600, User Manual

Page: 171 / 204

Management Application Workstation C-9

Server Monitor…enables or disables the monitor for servers. The
server monitor continually monitors server status using PING or
RPC even when MWA is not connected to the servers. The status of
the current server is displayed in the status bar. When the server
monitor is enabled, a check mark appears next to the menu item.

Exit…terminates MWA and closes the connections to all servers.
ƒ
View

Toolbar…displays or hides the toolbar. The toolbar includes buttons
for some of the most common commands in MWA, such as the Open
command. When the toolbar is displayed, a check mark appears next
to the menu item.

Status Bar…displays or hides the status bar. The status bar
describes the action to be executed by the selected menu item or
depressed toolbar button, and information on the current server.
When the status bar is displayed, a check mark appears next to the
menu item.

Summary…opens or closes the Server Summary dialog box. The
Server Summary dialog box displays the IP addresses, server names,
and current statuses of all the SG-registered servers on MWA. When
the Server Summary dialog box is open, a check mark appears next
to the menu item.

History Log…opens or closes the History Log dialog box. The
History Log dialog box displays server communications, operator
commands, and other events in chronological order. When the Delete
button is selected, the Delete Logged Messages dialog box displays.
The operator can delete all or part of the log. When the History Log
dialog box is open, a check mark appears next to the menu item.
ƒ
Reset/Reboot

Cold Reset…executes a cold reset on a current server.

Warm Reset…command executes a warm reset on a current server.
Some types of servers have been set such that a cold reset is executed
by the Warm Reset command. For details, refer to the users guide for
the managed machine.

Wake-up…activates a server whose power is off. The Wake-Up
command is executed normally under the following conditions. MWA
knows the server MAC address as the server has been connected with
MWA more than once. OS was terminated normally the last time
server was active.