NEC HV8600, User Manual

Page: 42 / 204

1-28 System Overview
Expand Capacity Function
Disk pack capacity can be expanded by adding a disk drive while the system is
running. This function is only supported if the server is in the disk array
configuration mode.
This function does not utilize operations such as data backup, pack
reconfiguration, initialization, restoring the data.
If a hard disk is added under the operation of the Global Array Manager,
perform the following.
„
After the hard disk is installed, wait for about 60 seconds and click the
Scan Device key. Clicking the Scan Device key after the execution of the
expand array operation, will display the added disk correctly.
If a hard disk is added to the system operating in RAID level 0, the server is
changed to the RAID6 level. Only RAID6 is available for this system when
using the expand capacity function.
Remote Power-On (Wake On LAN) Function
The remote power-on function turns on the system power by way of a network
or modem. If the system power is set to Off, it can be turned on remotely by
sending a specific packet from the main computer to the remote system.
Note: The standard default value of the remote power-on
function is “Disabled”. To make it enabled, the Wake On
LAN item in the System Hardware menu of the Setup Utility
described in Chapter 6 “BIOS Configuration” must be
changed to “Enable.”