NEC Express5800 120Li, User Manual

Page: 31 / 344

General Description 2-3
SYSTEM CHASSIS
Names and functions of the components are shown below.
Front View
1 2
1 2
1 Front door
Open this door to access the POWER switch, 5.25-inch devices, or the DVD-ROM drive, to
install/remove hard disk drives to 3.5-inch device bays, or connect the USB device. You can
lock the front door using the provided security key.
2 Key lock
When locked, secures the front door not allowing access to the front system controls.
3 Stabilizers (4)
Use the stabilizers to prevent the server from falling down.
4 LAN ACCESS lamp (green)
Lights in green while the server is connected to the network. Blinking in green indicates the
network activity. Numbers printed near the lamps indicate the LAN port number.
5 DISK ACCESS lamp (green/amber)
Lights in green while the internal hard disk drive is in access. When any one of the internal
hard disk drives fails, this lamp lights in amber.
6 POWER/SLEEP lamp (green)
Lights in green when the server is powered on. Goes off when the server is powered off.
Blinks when the system is placed in the sleep mode.
7 STATUS lamp (green/amber)
Lights in green while the server is in successful operation. When any error is detected, this
lamp lights or blinks in amber.
1
2
4
5 6 7
3