NEC Express 5800/320Lc, User Manual

Page: 40 / 365

2-6 General Description
NOTES
Notes on System Environment and Settings
Do not use the “Auto Detect” function for the transfer rate setting of LAN controller
on the OS.
Fix the transfer rate of the LAN controller to the transfer rate of hub.
→
NEC Express5800/ft series is not recognized on the network. For details, see “The
server is not found on the network:” of “Problems with NEC Express5800/ft
series” in “SOLVING PROBLEMS” in Chapter 7 “Troubleshooting” of this
User’s Guide.
Load Balancing mode can not be selected on the on-board LAN (100Base).
Load Balancing mode cannot be selected on "Stratus emb-82559 10/100 Enet
Adapter".
→
Only Fault Tolerance mode can be selected.
Do not remove “Stratus Fault Tolerant Virtual 69000 Video” displayed on the “Safely
Remove Hardware” dialog box.
Do not remove “Stratus Fault Tolerant Virtual 69000 Video” which is displayed on
the “Safely Remove Hardware” dialog box.
→
There is a possibility that the system does not run normally. For details, see
“Stratus Fault Tolerant Virtual 69000 Video” is displayed on “Remove Hardware”
dialog box:” of “Problems with NEC Express5800/ft series” in Chapter 7
“Troubleshooting”.