manualshive.com logo in svg

NEC Express 5800/320Lc, User Manual

Share
Download
NEC Express 5800/320Lc User Manual Download Page 312

8-2  System Upgrade 

SAFETY PRECAUTIONS 

Observe the following notes to install or remove optional devices safely and properly. 

WARNING

 

 

 
Observe the following instructions to use the server safely. There are risks of 
death or serious personal injury. See PRECAUTIONS FOR SAFETY in 
Chapter 1 for details. 
 

 

 

 

• 

Do not disassemble, repair, or alter the server. 

• 

Do not look into the CD-ROM drive. 

• 

Do not remove the lithium battery. 

• 

Disconnect the power plug before working with the server. 

 

 

 

CAUTION

 

 

 
Observe the following instructions to use the server safely. There are risks of 
fire, personal injury, or property damage. See PRECAUTIONS FOR SAFETY 
in Chapter 1 for details. 
 

 

 

• 

Do not install or remove components by a single person. 

• 

Do not install the server leaving the cover removed. 

• 

Make sure to complete component installation. 

• 

Do not pinch your finger(s). 

• 

High temperature 

 

 

 

Summary of Contents for Express 5800/320Lc














































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands