NEC Express 5800/320Lc, User Manual

Page: 138 / 365

4-6 System Configuration
Security
To set passwords on the BIOS level
Select [Security]
→
[Set Supervisor Password] and enter a password.
Set Supervisor password first, then User password.
To enable/disable the POWER switch
Select [Security]
→
[Power Switch Mask]
→
[Unmasked].
Select [Security]
→
[Power Switch Mask]
→
[Masked].
IMPORTANT:
Masking the POWER switch disables forced shutdown as well as power
on/off using the POWER switch.
Serial Devices
To setup serial devices
Select [Advanced]
→
[Peripheral Configuration] and setup each device.
Optional PCI–related devices
To install optional PCI boards, etc.,
Select [Advanced]
→
[Option ROM]
→
[PCI Slot n]
→
[Enabled]
n: Slot number to install the board
Boot
To change the boot order of devices connected to the server
Select [Boot] and specify the boot order.
To display POST check results
Select [Advanced]
→
[Advanced]
→
[Boot-time Diagnostic Screen]
→
[Enabled].
You can also press
Esc
while the NEC log is on the screen to display POST check results.
To control from the HW console
Remote operation via LAN
Select [Advanced]
→
[Advanced]
→
[RomPilot Support]
→
[Enabled].
Remote operation via WAN
Select [System Hardware]
→
[Console Redirection] and set each item.