NEC Express 5800/320Lc, User Manual

Page: 167 / 365

System Configuration 4-35
Selectable Boot Settings
If you put the cursor on "Selectable Boot Settings" with keyboard cursors (
↓
and
↑
) in the
"Configuration Settings" menu and press Enter , the screen for setting the information on the start
from the device connected to the host adapter appears.
Submenu item Parameter Description
Selectable
SCSI Boot Enabled
[Disabled] Specify whether the boot from SCSI device can be
selected or not.
SCSI Bus [0]
1 Select the bus to which the started SCSI device is
connected.
SCSI Boot ID [0], 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13,
14, 15 Set the SCSI ID of the started SCSI device.
SCSI Boot Lun [0], 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13,
14, 15 Select the number of the LUN to which the started
SCSI device is bound.
[ ]: Factory-set
Restore Default Settings
If you put the cursor on "Restore Default Settings" with keyboard cursors (
↓
and
↑
) in the
"Configuration Settings" menu and press Enter , the display changes to the screen for returning the
setting values to the default values.
IMPORTANT:
The default values can be restored for each SCSI bus.
Raw Nvram Data
If you put the cursor on "Raw Nvram Data" with keyboard cursors (
↓
and
↑
) in the "Configuration
Settings" menu and press
Enter
, the information on NvRAM installed in the host adapter is
displayed in the hexadecimal format.
This function is provided to solve problems. The information cannot be edited.