User’s manual NAVIGON 70 Easy | 70 Plus Live
Working with the map
- 63 -
Recalculate route: Recalculates the route. Use this function if you have
wandered far from the calculated route and would like a new route
proposal.
7.6.3
Navigation in Track mode
This mode becomes active if you have planned a route with a track for
the navigation (refer to "Tracks and multi-leg routes" on page 42).
After the route was shown in
Preview
mode, navigation was started.
First the navigation guides you from your current location to the
beginning of the loaded track. This navigation corresponds to the
navigation of the selected route profile (refer to "Navigation in Vehicle
mode" on page 57 and to "Navigation in Pedestrian mode" on page 61).
As soon as the first recorded point of the track is reached, the
navigation switches to
Track
mode.
Navigation in
Track
mode works like navigation in
Pedestrian
mode
(refer to "Navigation in Pedestrian mode" on page 61).
There are only a few differences:
►
The Recalculate route function is not available.
►
If more route points follow after the track, the navigation will switch
back to the originally selected mode.
7.6.4
Navigation in Offroad mode
Note:
This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
(Pedestrian) symbol.
Nor does it become active if you are navigating along a track (refer to
"Navigation in Track mode" on page 63).
If you enter a destination which lies off the digitalised road system, the
navigation will guide you first in
Vehicle
mode to the point of the
digitalised road system that lies nearest to the destination. From here
the navigation then continues in
Offroad
mode.
If the current position at the beginning of navigation lies off the
digitalised road system, the navigation will guide you first in
Offroad
mode to the nearest point of the digitalised road system. From here the
navigation then continues in
Vehicle
mode.
Navigation in
Offroad
mode works like navigation in
Pedestrian
mode
(refer to "Navigation in Pedestrian mode" on page 61).
There are only a few differences:
►
The part of the route already covered is not shown.
►
The Recalculate route function is not available.
