User’s manual NAVIGON 70 Easy | 70 Plus Live
Navigation
- 45 -
If you want to load a route:
2. Tap on the route that you want to load.
3. Tap on
(Load Route).
The
R
OUTES AND
T
RACKS
window opens. The starting point and the
route points of the loaded route have been entered. For the route
calculation the starting point is replaced by the current position. You
will now be guided to the first route point.
If you want to load a track:
2. Tap on the track that you want to load.
3. Tap on Load Track.
The
R
OUTES AND
T
RACKS
window opens. The current location is
entered as the starting point. The loaded track is entered as route
point 1. Navigation then leads first to the starting point of the track.
For details about navigating along recorded tracks refer to chapter
"Navigation in Track mode" on page 63.
5.4.6
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The
R
OUTES AND
T
RACKS
window is open. The starting point and at
least one route point have been entered.
►
Tap on Show Route.
The map opens in
Preview
mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
5.4.7
Simulating routes
It is also possible simply to simulate navigation on a planned route.
Note:
GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
1. Tap on Options > Simulation.
►
If you have planned a route with only one route point and the
MyRoutes
function is activated, you will be prompted to select
a route for the simulation.
The route will be recalculated for simulation purposes.
