User’s manual NAVIGON 70 Easy | 70 Plus Live
Switching on the navigation device
- 17 -
►
Tap on OK.
Note:
How to deactivate demo mode is explained in "Troubleshooting"
in section "I have accidentally activated demo mode" on page 103.
Note:
If you have not used the navigation device for a long time, the
battery may be flat.
When you connect the navigation device to the supplied car charger
cable, it can be switched on immediately even if the battery is flat. If you
use a different charger cable or have connected your device to a PC, it
may need charging for a few minutes before it can be switched on.
Chargers and other accessories are available in the NAVIGON online
shop at
www.navigon.com
or in specialist stores.
Switching the navigation device to standby mode
►
Press briefly on the
(
On/Off
) key (max. 1 second).
A message will appear telling you that the device will be switched to
standby mode in several seconds.
►
Wait for the device to be switched to standby mode or tap on
Standby.
Automatic Standby
You can configure the navigation device so that it is automatically
switched to standby mode when not in use.
►
In the
N
AVIGATION
window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
