Nautel NX15 Operation And Maintenance Manual Download Page 26

Page: 26 / 178

NX15/NX25 Operations and Maintenance Manual

Operating the transmitter

Page 2-2

Issue 6.0 2019-01-31

Using the AUI

The NX15/NX25 has an advanced user interface (AUI) that is displayed on a 17-inch, colour

LCD screen mounted on the front of the control cabinet (see

Figure 2.1

). The AUI is

controlled locally by a touch screen or remotely using a PC and a web browser.

This section includes the following topics:

•

“Logging into the AUI” on page 2-3

•

“Describing the AUI layout” on page 2-9

•

“Navigating from page to page” on page 2-12

•

“Summarizing the AUI pages” on page 2-13

Figure 2.1: Front Panel AUI

NOTE

: Depending on the connection speed, it may take some time to display the AUI login

screen remotely using a PC and a web browser. The amount of data that has to be transmitted

is approximately 14MB. Therefore, if the connection speed to the transmitter is 1Mb/s, it will

take approximately 2 minutes for the login screen to load.

Summary of Contents for NX15



















































































































































































Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands

Nautel NX15, Operation And Maintenance Manual

Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands