Nautel NX15, Operation And Maintenance Manual

Page: 105 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Issue 6.0 2019-01-31 Page 2-81
Notifications
The
Notifications
feature (see Figure 2.58 ) provides a means for the transmitter to issue emails
or texts (SMS messages) triggered by user defined alarm events. If you use this feature, you
must also configure an email (see “Email Configuration” on page 2-80 ).
Figure 2.58: Notifications
To configure the notifications feature, perform the following steps:
1. Pre-existing notifications are displayed in the Notifications list (e.g., “Audio Loss”).
Click
Add
to create a new item for notification, click
Edit
(after highlighting an existing
item) to edit an existing item or click
Delete
to erase an item.
2. When you click
Add
or
Edit,
the screen in Figure 2.59 will appear. This screen allows
you to add or edit a
Notification Name, Recipient Email,
and define the alarm list by
Device
type (Controller, Exciter A or B, Rack # or RF Module #). Add or remove
alarms by moving them (using the >> and << arrow buttons) from the
Available
Alarms
list to the
Selected Alarms
list. An email is issued when any alarm in the
Selected Alarms
list is active.
In the
Recipient Email
field, you can enter a standard email address to initiate an email
or you can enter a mobile phone number and SMS gateway to initiate a text (SMS
message). The email-to-SMS text format is mobilenumber@mobile_gateway (e.g.,