Nautel NX15, Operation And Maintenance Manual

Page: 28 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Page 2-4 Issue 6.0 2019-01-31
2. On your router or firewall software, open ports 3501 and 80 and close (restrict access
to) port 22. If you are using RDS data, open port 7005. If you are using SNMP, open
port 161.
3. Enter the IP address in a web browser’s address field.
4. When properly configured, the login menu (see Figure 2.3 on page 2-7 ) appears. Your
IP address and any login messages appear in a box at the top, beside the logo, and the
current software version number appears along the bottom of the login window.
If the login menu does not appear, then your login may not be properly configured
and you should consult the documentation for the
User Accounts
page (see See “User
Accounts” on page 72. ).
NOTE
: Depending on the connection speed, it may take some time to display the AUI login
screen remotely using a PC and a web browser. The amount of data that has to be transmitted
is approximately 14MB. Therefore, if the connection speed to the transmitter is 1Mb/s, it will
take approximately 2 minutes for the login screen to load.
5. Log in to the AUI by entering the appropriate parameters in the login window.
• In the
Language
field, click the down-arrow to review a drop-down menu
displaying the available language options, and select one.
• In the
User
field, enter the username. Default is “Nautel”.
• In the
Password
field, enter the password. Default is blank.
NOTE
: The Nautel AUI is factory configured with a default login username and password.
Nautel recommends that you change the password to improve overall system security. See See
“Changing the password” on page 74. .
• Press
Submit
to accept your login parameters and display the AUI
Home
page
( Figure 2.4 on page 2-9 ). Note: The opening screen (the
Home
page) will have the
layout from the previous login session.
NOTE
: If you do not have a user account, it must be set up by an existing user with proper
permissions. See See “Adding a user” on page 74. .
6. At any time, you can access the login menu by clicking the
Logout
button (and then
OK
) at the bottom, right-hand corner of the AUI (see Figure 2.4 on page 2-9 ).