Nautel NX15, Operation And Maintenance Manual

Page: 134 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Page 2-110 Issue 6.0 2019-01-31
2. Any existing configurations (e.g., Default Config 1610 kHz) will appear in the list. The
active configuration, if applicable, is highlighted in green. You can view or edit existing
configurations by pressing
Edit
, if available. You can also create a new configuration
by pressing
Add
or remove a configuration by pressing
Delete
. You must have
Administrator
user account permission to edit, add or delete configurations.
3. If you press
Edit
(
View
) or
Add
, the
Configuration Details
window appears (see
Figure 2.81 on page 2-110 ). In this screen you can enter or select the appropriate
parameters for your desired configuration, including Name, Mag-Phase Delay, B+
Level, AM-AM Curve, AM-PM Curve and EQ Curve. When you are finished editing
or creating the configuration, press
OK
to save the configuration or press
Cancel
to
return to the
Precorrection Settings
page. Your new configuration should appear in
the
Configurations
list.
Procedure to add a configuration to a preset:
1. Select the
Presets
option from the
Menu
page to open the
Presets
page.
2. Press the
Load
button to select the preset that you want to edit.
3. In the
General
tab, select the
Configuration
field’s drop-down menu and select the
desired configuration for that preset Press
Save
to overwrite the existing preset or
Save New
to create a new preset.
NOTE:
you can edit a preset without making it active
(see “Presets - editing operational settings” on page 2-50 ).