Nautel NX15 Operation And Maintenance Manual Download Page 167

Page: 167 / 178

NX15/NX25 Operations and Maintenance Manual

Routine maintenance

Issue 6.0 2019-01-31

Page 3-7

Inspecting lightning protection systems

You should inspect the lightning protection systems that are connected to your NX15/NX25

transmitter, ac power, RF feedline, antenna and tower periodically to ensure that your site,

equipment and personnel are fully protected.

Interval

Every 6 months.

Parts and tools

Depends on your site, but may include a DVM, ladder, binoculars, and continuity tester.

Procedure

Perform the following steps to test the lightning protection systems:

1. Test the continuity between ground available at your lightning arrestor and ground

available on various pieces of equipment connected to the transmitter. Ensure that

there is no resistance (0 ohms).

2. Physically inspect the lightning arrestor to ensure that all connections are tight. Also

look for any sign of scoring or burning (indications of possible damage from earlier

lightning strikes).

3. Using binoculars, visually inspect the hardware on the tower. Look for charred,

broken or frayed connections and corrosion.

Summary of Contents for NX15



















































































































































































Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands

Nautel NX15, Operation And Maintenance Manual

Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands