Nautel NX15 Operation And Maintenance Manual Download Page 169

Page: 169 / 178

NX15/NX25 Operations and Maintenance Manual

Non-standard maintenance

Issue 6.0 2019-01-31

Page 4-1

Section 4:

Non-standard maintenance

This section provides instructions for performing non-standard maintenance on the NX15/

NX25 transmitter. This section includes the following topics:

•

Upgrading software

•

Updating or Replacing Compact Flash Card - see page 4-4

Upgrading software

Periodically, enhancements or improvements to the operating system are identified and made

available. Perform a software upgrade as follows:

Interval

As required.

Parts and tools

• Laptop (i.e., local computer for direct connection) or network computer with Win-

dows and Internet Explorer Web browser

• CAT5 Ethernet cable

• Upgrade software (

*.tgz

file), provided via email, web download or flash card

Preliminary Checks

1. Determine the current software revision installed. Via the advanced user interface

(AUI) screen, go to

System Settings

Upgrade Software

. Select the *.tgz file in

the Select Upgrade File list (should highlight in blue) and click

Details

. Note the

current software revision for Audio Player, AUI, Controller, Exciter, Rack and PM.

2. Using a web browser go to

ftp://www3.nautel.com/NX_Series/

and verify your

software version is the latest. If necessary, download the latest

*.tgz file to a laptop or

network location.

Summary of Contents for NX15



















































































































































































Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands

Nautel NX15, Operation And Maintenance Manual

Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands