Nautel NX15, Operation And Maintenance Manual

Page: 155 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Issue 6.0 2019-01-31 Page 2-131
Editing or Deleting an Audio Stream
1. From the
Streams
tab (see Figure 2.98 on page 2-131 ), select the desired audio stream
from the list. Click the
Edit
button to modify the audio stream or the
Delete
button to
remove the audio stream.
2. If you are editing an audio stream, enter the appropriate information for the audio
server (Name and URL for Icecast/Shoutcast). Make sure the NX15/NX25 can access
the location.
3. Click
OK
to either edit or delete the audio stream, or click
Cancel
to discard changes.
Using the ac disconnect switch
A key controlled ac disconnect switch box (see Figure 2.99 on page 2-133 ) is provided with the
NX15/NX25 transmitter to ensure operator safety. The transmitter’s rear door must be closed
and locked before ac power to the transmitter can be turned on. Similarly, ac power must be
turned off before the rear door can be opened.
Opening the transmitter’s rear door
Follow these steps to gain access to the rear of the transmitter:
1. Move the ac switch to the
OFF
position. This allows the
SERVICE KEY
to be moved.
Turn the
SERVICE KEY
clockwise to the
OFF
position and remove the key from the ac
disconnect switch box. When the
SERVICE KEY
is removed, the ac disconnect switch is
locked in the
OFF
position.
2. Insert the
SERVICE KEY
into the key hole in the handle of the transmitter’s rear door
and turn the key clockwise.
3. Open the rear door of the transmitter.
Applying ac power to the transmitter
Follow these steps to close the transmitter and apply ac power:
1. Close and latch the transmitter’s rear door. Turn the
SERVICE KEY
counter clockwise to
lock the door. Remove the
SERVICE KEY
.