Nautel NX15, Operation And Maintenance Manual

Page: 27 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Issue 6.0 2019-01-31 Page 2-3
Information is displayed in a series of pages (screens) that serve specific transmitter functions.
The AUI has the following configurable displays:
• Instrumentation panels ( See “Instrument Panels - viewing displays” on page 29. )
• Real-time meters ( See “Meters page - viewing real-time meters” on page 44. )
• Transmitter status ( See “Status - viewing transmitter status” on page 70. )
• Events logs ( See “Viewing Transmitter Log” on page 22. )
• Presets ( See “Presets - editing operational settings” on page 50. )
• System settings ( See “System Settings page” on page 95. )
• Pre-correction settings ( See “Precorrection Settings page” on page 104. )
• User Accounts ( See “User Accounts” on page 72. )
• Changeover ( See “Changeover page - changing exciter transfer settings” on
page 113. )
• User settings ( See “User Settings” on page 77. )
• Remote input/output configuration ( See “Remote I/O page” on page 123. )
• Scheduler ( See “Preset Scheduler” on page 65. )
• Audio Player ( See “Audio Player” on page 128. )
See the complete AUI flow diagram illustrated in Figure 2.2 on page 2-5.
Logging into the AUI
The transmitter’s AUI provides a means to restrict local and remote access to transmitter
control functions to authorized users only. User accounts can be pre-defined to set access
restriction from read-only (no control) and full-administrative control.
Access the AUI using a web browser as follows:
1. Configure your network settings (see See “Setting up the Network” on page 78. ).