MUTOH valuejet 1614 User Manual Download

Page: 118 / 125

Users Guide ValueJet 1614

118

AP-75790 Rev 1.4 -22/02/2011,

6.3.3 Media-related troubleshooting

The media slips or is torn during initialization.

Notes

If the media is jammed or torn, remove

it according to when media is jammed

N°

Possible cause

remedy

Reference

Are you using the recommended media?

Use the recommended
media.

Is the loading position of the media correct?

Set the media correctly.

Setting roll media

Is the roll media set correctly?

Set the roll media
correctly.

Loading roll media

Are there any foreign materials such as paper
attached to the pressure roller?

Clean the pressure roller.

Cleaning the inside of the

printer

Is the printer being used in an environment
other than the one specified, such as in direct
sunlight?

Only use the printer in an
environment that is
specified for use.

Installation manual

Are you using folded, torn or rolled media?

Replace the media.

Cautions on handling
media"

Does the media bend?

Use the recommended
media. When using
media other than the
dedicated one, set the
Vacuum Fan menu.

Panel setup menu"

The media is crumpled during initialization.

Notes

If the media is jammed or torn, remove it according to when media is jammed

N°

Possible cause

Remedy

Reference

Are you using the recommended media?

Use the recommended
media.

Is the loading position of the media correct?

Set the media correctly.

Setting roll media

Is the media loaded at an angle?

Set the media straight.

Setting roll media

Are there any foreign materials such as paper
attached to the pressure roller?

Clean the pressure roller.

Cleaning the inside of
the printer

Is the printer used in an environment other
than the one specified, such as near an air
conditioner?

Only use the printer in an
environment that is
specified for use.

Installation manual

Are you using folded, torn or rolled media?

Replace the media.

"Cautions on handling
media"

All manuals and user guides at all-guides.com

Summary of Contents for valuejet 1614






























































































































Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands

MUTOH valuejet 1614, User Manual

Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands