MUTOH valuejet 1614 Page 94 User Manual Download

Page: 94 / 125

Users Guide ValueJet 1614

AP-75790 Rev 1.4 -22/02/2011,

4.8.5.2

Settings that can be changed or confirmed while printing.

Notes

The Print start menu is displayed only when the printer is warming up.
When you change a setting during operation, be sure to

select Backup to save the setting that you

changed.

If the printer returns to Normal without Backup being selected, the changed setting is not saved

Setup Item

Setting

Description

Print Start

----

[ENTER] key: if the heater temperature does not
reach the set value during warming-up, printing
starts.

Temperature

Pre

Check the current Pre Heater temperature.

Platen

Check the current Platen Heater temperature

After

Check the current After Heater temperature

Pre Heater

OFF / 30°C to 50°C

Change the Pre Heater temperature

Platen Heater

OFF / 30°C to 50°C

Change the Platen Heater temperature

After Heater

OFF / 30°C to 50°C

Change the After Heater temperature

PF Adjust

-20 pulse to 0 to 20 pulse

Change the feed adjustment value

Backup

----

[ENTER] key: Save the changed setting.

----

[CANCEL] key: the printer returns to normal.

Be sure to read and understand the safety warnings before handling the printer.

All manuals and user guides at all-guides.com

Summary of Contents for valuejet 1614






























































































































Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands

MUTOH valuejet 1614, User Manual

Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands