MUTOH valuejet 1614 User Manual Download

Page: 66 / 125

Users Guide ValueJet 1614

AP-75790 Rev 1.4 -22/02/2011,

4.5 ADJUST PRINT

Notes

This printer has been adjusted for optimum print quality before shipment at the Mutoh factory.
Align the print head when the print quality decreases after the installation environment or the media has
been changed.

Be sure to read and understand the safety warnings before handling the printer.

Align the print head as described in the following procedure:

Step 1 :

Switch ON the printer.

Step 2 :

Load more than A3 size print media.

Step 3 :

Confirm that the printer functions normally.

Step 4 :

Press the [Menu] key on the operation panel.

Result:

The operation panel displays "Menu 1: Setup>".
Shifts to the Setup menu display.

Step 5 :

Press the [>] key on the operation panel.

Set1: MediaType is displayed on the operation panel

Step 6 :

Press the [+] or [] key on the operation panel to select the media type to use.

Step 7 :

Press the [Enter] key on the operation panel.

**>1: PrintMode is displayed on the operation panel.

Step 8 :

Press the [Enter] key on the operation panel.

Mode: quality 1 will be displayed on the operation panel.

The display shifts to the printing mode menu.
Select the printing mode you want to use.

Step 9 :

Press the [+] or [] key on the operation

panel to select "Adj.4: Bi-D Quality".

Step 10 :

Press the [CANCEL] key on the operation panel several times.

The operation panel shifts back to normal.
Displays the adjustprint menu on the operation panel.

Step 11 :

Press the [menu] key on the operation panel.

Menu1:Setup> is displayed on the operation panel

The operation menu shifts to the setup menu display.

Step 12 :

Press the [+] key or [-] key to select Menu3: Adjust print

Step 13 :

Press the [>] key on the operation panel.

Adj 1 Confirm is displayed on the operation panel.

The display enters the adjustprint menu.

Step 14 :

Press the [Enter] key on the operation panel.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for valuejet 1614






























































































































Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands

MUTOH valuejet 1614, User Manual

Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands