MUTOH valuejet 1614 User Manual Download Page 84

Page: 84 / 125

Users Guide ValueJet 1614

AP-75790 Rev 1.4 -22/02/2011,

4.7.14

Slant Check menu

Setup Item

Setting Value

Description

Slant Check

OFF

Slant Check is not performed.

<ON>

Slant Check is performed between two consecutive print jobs.

[Enter] key: Save the setting and shift to the previous hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.

Refer to: Setup menu

4.7.15

Auto Cleaning menu

Perform an auto clean to prevent the print head from clogging.

Setup Item

Setting Value

Description

Auto Cleaning

OFF

The auto cleaning is not performed.

1 hours

When the selected time is reached, the auto cleaning is
performed.

2 hours
3 hours
4 hours
5 hours
6 hours
9 hours

12 hours
18 hours
24 hours

[Enter] key: Save the setting and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.

Refer to: Setup menu

4.7.16

Ink Status menu

Notes

When displaying the Ink Status menu, use genuine ink cassette. When using ink cassette other than
the genuine ones, the ink status will not be displayed correctly.

Setup Item

Setting Value

Description

KCMY

0 - 100 (Unit: %)

Remaining ink quantity of K, C, M and Y colour is displayed.

[Cancel] key: Shift to the previous hierarchy.

Refer to: Setup menu

All manuals and user guides at all-guides.com

Summary of Contents for valuejet 1614






























































































































Search results

Summary of Contents for valuejet 1614

Reviews:

Brands by name

Popular brands

MUTOH valuejet 1614, User Manual

Search results

Summary of Contents for valuejet 1614

Reviews:

Brands by name

Popular brands